1、升降机厂家http://www.jntr168.com/建议大家采用先进的优先阀与负荷传感全液压转向器形式，新系统能够按照转向要求，优先向其分配流量，无论负载大小、方向盘转速高低均能保证供油充足，剩余部分可全部供给工作装置回路使用，从而消除了由于转向回路供油过多而造成功率损失，提高了系统效率，降低了液压泵的工作压力。
Lift manufacturer recommends that you use the advanced priority valve with load sensing hydraulic steering gear in the form of the new system in accordance with the requirements of the steering, assign priority traffic, regardless of load size, wheel speed level can ensure adequate oil supply, the remaining portion will be fully use work equipment supply circuits, thus eliminating the steering circuit oil caused by excessive power losses, improve system efficiency and reduce the hydraulic pressure of work.

2、升降机厂家提醒大家优化设计动臂油缸和液压泵造型，降低系统工作压力。通过优化计算，动臂油缸采用标准系列80/4。液压泵排量由10ml/r提高为14ml/r，系统调定压力为14MPa，满足了动臂油缸举升力和速度要求。
Lift manufacturers to remind you to optimize the design of the boom cylinders and hydraulic modeling, reduce system operating pressure. By optimizing the computing boom cylinder with standard series 80/4. Displacement hydraulic pump by 10ml / r increased to 14ml / r, the system set pressure is 14MPa, to meet the boom cylinder lifting force and speed requirements.

3、升降机厂家http://www.jntr168.com/谈到在使用过程中还应注意升降机的正确使用与维护，定期添加或更换液压油，保持液压油的清洁度，加强日常检查和维护。
Speaking lift manufacturers should also be noted in the course of the proper use and maintenance of loaders, hydraulic oil regularly add or replace, maintain the cleanliness of hydraulic oil, strengthen the routine inspection and maintenance.