全国24小时热线电话:

159-1008-1959(点击拨打)

您现在的位置:首页新闻中心电气故障产生噪音的原因
推荐产品

Similar products

电气故障产生噪音的原因

1、电动马达产生高噪音的原因主要有电动机转子弯曲、磨损严重或轴承损坏,导致电动马达扫膛,产生噪音;电动马达冷却风扇损坏或固定不牢固产生高噪音;电动马达固定不牢固,也能引起震动,产生高噪音。
Lift manufacturers analysis of electric motors have a major reason for the high noise of a motor rotor bending, severe wear or bearing damage, resulting in electric motors sweep chamber, generating noise; an electric motor cooling fan is damaged or not firmly fixed to produce high noise; an electric motor is not firmly fixed, can cause vibration, resulting in high noise.

2、介绍交流接触器也能产生高噪音,当电源电压低于额定电压的85%、接触器E形铁芯的短路环折断、磁轭与衔铁的接触面歪斜、有灰尘或生锈接触不好时都会导致接触器产生嗡嗡的噪音。
Lift manufacturers introduce AC contactors can also produce high noise, when the supply voltage is less than 85% of rated voltage, short contact E-shaped core of the ring to break the yoke of skewed armature contact surface, there is no contact with dust or rust Hershey will result in contact produces a buzzing noise.

3、谈到电磁换向阀电磁线圈固定不牢固,衔铁频繁的分开和吸合也能产生高噪音。
Speaking solenoid valve lift manufacturers analysis is not firmly fixed solenoid armature frequent and pull apart can also produce high noise.

上一篇:升降货梯机械故障引起噪音大如何处理?        下一篇:升降货梯困人如何处理?
联系我们:
 
联系人:王经理
 
热线:159-1008-1959
 
网 址:www.jntr168.com
 
邮 箱:jntrjixie@163.com
 
地址:山东省济南市济阳区济阳街道工业园15-4号
微信二维码:

扫描二维码 沟通洽谈
短信 电话

请长按保存二维码后点击确定按钮,进入微信扫一扫界面,点击右上角‘相册’选择我们的二维码,再点击右上角‘完成’识别添加。
(为防止浏览器错误识别,请勿直接在浏览器中识别二维码)

确定