在一般的升降货梯http://www.jntr168.com/通常选择马达以上1.1KW，以便实现所述升降货梯马达的理想效果可以正常使用，下面济南天锐机械制造有限公司的专家给大家介绍一下升降货梯电机工作环境有哪些要求？

1、升降货梯电机要求通风、散热性良好，因为电机需要连续工作，必须经常通风，以防止过高的温度影响正常使用的设备。
Cargo lifter motors require ventilation, heat dissipation is good, because the motor requires continuous work, we must always be ventilated to prevent the device from excessive temperature affect the normal use.

2、当升降货梯在高温环境中的电机的操作，来选择绝缘材料水平，防止高温燃烧的部分。
When cargo lifter motor operating temperature environments to choose the level of insulation material, to prevent high temperature combustion part.

3、当升降货梯电机设备不低于IP23少了房间，升降货梯电机防护等级的安装，在室外安装时，应达到IP54。
When cargo lifter electrical equipment is not lower than IP23 less room, cargo lifter motor protection class installation, outdoor installation, should reach IP54.

4、升降货梯http://www.jntr168.com/电机电站的选择应该是噪音小，见效快，操作灵活。当升降货梯安装到内放置的湿度，电机应配备内部加热器，过热报警和断电保护装置。
Select cargo lifter motor power plant should be a small noise, quick, flexible operation. When installed in the cargo lifter placed humidity, motor should be equipped with an internal heater, overheating alarm and power protection devices.