升降货梯http://www.jntr168.com/的蓄能器主要是储存油液多余的压力能，并在需要时释放出来。下面济南天锐升降机械的有关技术人员给大家介绍一下升降货梯蓄能器使用注意事项。

1、升降货梯的皮囊式蓄能器原则上应垂直安装(油口向下)，只有在空间位置受限制时才允许倾斜或水平安装。不同的蓄能器各有其适用的工作范围，例如，皮囊式蓄能器的皮囊强度不高，不能承受很大的压力波动，且只能在-20摄氏度~70摄氏度的温度范围内工作。
Should be mounted vertically on a cargo lifter bladder accumulator principle (port down), only when the spatial location of a restricted permit inclined or horizontal mounting. Different accumulators have their applicable scope of work,for example, bladder Bladder accumulators strength is not high, can not afford a lot of pressure fluctuations, and can only work within the -20 degrees C to 70 degrees C temperature range.

2、充气式升降货梯蓄能器中应使用惰性气体(一般为氮气)，允许工作压力视蓄能器结构形式而定，装在管路上的蓄能器须用支板或支架固定。
Inflatable cargo lifter accumulator should use an inert gas (usually nitrogen), allowable working pressure accumulator in the form of visual structure may be mounted in the pipeline accumulators must use the support plate or bracket.

3、升降货梯http://www.jntr168.com/蓄能器与管路系统之间应安装截止阀，供充气、检修时使用。蓄能器与掖泵之问应安装单向阀，防止液压泵停车时蓄能器内储存的压力油液倒流。
Should be installed between cargo lifter accumulator shutoff valve and piping systems for inflatable, use and maintenance. Accumulator and tuck pump check valve of the question should be installed to prevent parking in the accumulator when the hydraulic pressure of the oil is stored back.