升降货梯有很多配件组成,其中轴销是固定升降平台使用最多的部件,也是比较容易损坏的部件。大家在使用时需要二至三年更换一次,大家在更换时需要注意哪些问题呢?
1、升降货梯http://www.jntr168.com/如果需要更换的轴销超过50%时,应对所有轴销进行检查,磨损超过90%的轴销必须更换。
If the cargo lifter shaft pin needs to be replaced more than 50%, to address all pivot pin checks wear more than 90% of the pivot pin must be replaced.
2、升降货梯更换轴销时,应使用行车或吊链把台面拆下,并平稳放置在安全影响工作的地方,应检查耐磨套的磨损状况,如果磨损超过了80%,也应该同时更换。耐磨套更换时,应由正规生产厂家更换,耐磨套的定位的精准程度,这样直接影响着升降平台的偏摆量。
When cargo lifter replacement axle pin, should use the road or hanging chain remove the tops and put in place security implications steady work, check the wear sleeve wear conditions, if wear exceeds 80%, it should also be replaced.When the wear sleeve replacement, regular manufacturer shall replace the extent of wear sleeve accurate positioning, so a direct impact on the amount of deflection of the lifting platform.
3、升降货梯http://www.jntr168.com/轴销更换完成后,应重新进行技术检验,磨损严重的轴销部位,应通知厂家,由厂家进行技术分析,找出磨损的快的原因,如果是厂家的技术原因,应该由厂家自行解决.
Lift freight elevator shaft pin replacement is completed, it should be re-tested technology, badly worn shaft pin parts, should notify the manufacturer, the technical analysis by the manufacturer to find out the cause of rapid wear and,if the manufacturer for technical reasons, it should be by the manufacturers themselves resolved.
请长按保存二维码后点击确定按钮,进入微信扫一扫界面,点击右上角‘相册’选择我们的二维码,再点击右上角‘完成’识别添加。
(为防止浏览器错误识别,请勿直接在浏览器中识别二维码)